is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Install Stucco Windows
1 Hammer
2 Chisel
3 Screwdriver
4 Level
5 Masonry trowel
6 Utility knife
7 Caulk gun
8 Tape measure
9 Safety glasses
10 Respirator mask

How to Install Stucco Windows

Step-by-Step Guide: Installing Stucco Windows Made Easy

Installing stucco windows is an important task that requires careful planning and execution. Here is a step-by-step guide to help you install stucco windows like a professional:

Step 1: Measure the Window Opening
Before you start installing stucco windows, you need to measure the window opening accurately. This will help you determine the size of the window you need to purchase. Make sure to measure the width, height, and depth of the opening.

Step 2: Prepare the Window Opening
Next, you need to prepare the window opening for installation. Remove any old window frames, debris, or caulking from the opening. Clean the opening thoroughly and make sure it is free from any obstructions.

Step 3: Apply the Window Flashing
The next step is to apply the window flashing. This is an important step as it helps to prevent water from seeping into the window opening. Cut the flashing to fit the size of the window opening and apply it around the perimeter of the opening.

Step 4: Install the Window
Now it's time to install the window. Carefully place the window into the opening and make sure it is level and plumb. Secure the window in place using screws or nails.

Step 5: Apply the Stucco
Once the window is securely in place, it's time to apply the stucco around the window frame. Apply a layer of stucco around the perimeter of the window and smooth it out using a trowel. Make sure the stucco is evenly applied and covers the entire frame.

Step 6: Finish the Stucco
After the stucco has been applied, it's time to finish it. Use a sponge or brush to texture the stucco and create a uniform finish. Allow the stucco to dry completely before painting or applying any additional finishes.

Step 7: Caulk and Seal the Window
The final step is to caulk and seal the window. Apply a bead of caulk around the perimeter of the window to seal any gaps or cracks. This will help to prevent water from seeping into the window opening and causing damage.

In conclusion, installing stucco windows requires careful planning, preparation, and execution. By following these steps, you can ensure that your stucco windows are installed correctly and will provide years of reliable performance.