is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

How to Install Stucco Driveway

Step-by-Step Guide: Installing Stucco on Your Driveway

Installing stucco on your driveway can give it a fresh and attractive look. It can also provide a durable surface that can withstand heavy traffic and weather conditions. Here are the steps to follow when installing stucco on your driveway:

1. Clean the driveway surface: Before applying the stucco, the driveway surface must be clean and free of any debris or loose material. Use a pressure washer to remove any dirt, oil, or grease on the surface. Allow the driveway to dry completely before proceeding.

2. Apply a bonding agent: Once the surface is clean, apply a bonding agent to the entire driveway surface. This will help the stucco adhere to the surface and prevent it from cracking or peeling. Follow the manufacturer's instructions for applying the bonding agent.

3. Mix the stucco: Mix the stucco according to the manufacturer's instructions. The consistency of the stucco should be like thick peanut butter.

4. Apply the first coat: Using a trowel, apply the first coat of stucco to the driveway surface. The thickness of the first coat should be about 1/4 inch. Spread the stucco evenly over the surface, making sure to fill any cracks or gaps.

5. Apply the second coat: Once the first coat has dried, apply the second coat of stucco. The thickness of the second coat should be about 1/8 inch. Use a trowel to smooth out the surface and create a uniform finish.

6. Finish the surface: After the second coat has dried, use a float or trowel to smooth out any rough spots or imperfections in the surface. You can also add texture to the surface by using a broom or other tool to create a pattern.

7. Allow the stucco to cure: Once the stucco is applied, it needs time to cure. Follow the manufacturer's instructions for curing time. During this time, keep the surface moist by misting it with water.

8. Apply a sealer: After the stucco has cured, apply a sealer to the surface. The sealer will protect the stucco from moisture and other weather conditions. Follow the manufacturer's instructions for applying the sealer.

By following these steps, you can install stucco on your driveway and create a durable and attractive surface. Remember to follow all safety precautions when working with stucco and to wear protective gear such as gloves and goggles.